Safe on all types of mesh.
Will not crystallize, coagulate, or plug rinse jet nozzles on automatic reclaiming unit.
Easily mixes with regular cold tap water.
Non-hazardous and drain safe.
Step 1: Remove all ink from the screen and wash with either screen cleaner depending on ink system used. Rinse both sides of screen with water.
Step 2: Spray or wipe The Remover onto both sides of the screen. Allow 30 to 40 seconds to allow for full penetration.
Step 3: Remove emulsion residue from the screen with a high pressure water rinse.
Technical data herein is believed to be accurate. It is offered for your consideration, investigation, and verification. Buyer assumes all risk of use, storage, and handling of the product. No warranty, express or implied is made, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. Nothing contained herein shall be considered as a license to operate under, or recommendation to infringe any patents.